I think this is a good Idea... Swisscom could also look on the Dslam Log if you have to many errors on the Line... Many of the problems could be elemated by lower rates. Greetings Xaver ----- Original Message ----- From: "Olivier Mueller" om-lists-swinog@omx.ch To: swinog@swinog.ch Sent: Wednesday, March 05, 2008 4:03 PM Subject: Re: [swinog] VDSL/Zyxel P2802 HWL not "strong" enough for asmallcompany LAN?
On Wed, 2008-03-05 at 14:56 +0100, Xaver Aerni wrote:
What kind of Setup did you have on the Dislam... Please check if the link is going down... If yes. Swisscom should reduce the Traffic rate on the line. Standard is the max. by 25000. Some line must be fixed on 20000 or less...
The status of port is showtime Link type: VDSL2 Bearer1 downstream rate: 27536 kbps Bearer1 upstream rate: 11040 kbps
So before getting an Alix board, you suggest I should first ask Swisscom (via Green) to reduce the rate?
Regards & thanks for your feedback! Olivier
swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog