Hallo zusammen,
Wir zügeln nächste Woche unser Mailserver auf ein neues C-Netz.
Ich möchte jedoch dies ohne grossen Unterbruch machen.
Deshalb habe ich eine Theorie gemacht.
Wenn ich beim DNS schon 2 Tage vorher einen 2 MX Record mache... (auf die neue IP Adresse) Dann wäre ja theoretisch möglich das zum Zeitpunkt des Umhängen und umprorgrammieren der Server auf der neuen Adresse gefunden wird.
Stimmt meine Annahme oder kann dies zu anderen Problemen führen.
Nach dem Umhängen löscht man die alten MX Records raus.
Hat bereits jemand damit erfahrungen gemacht.
Gruss Xaver
Greetings from sunny Basel (o;
Has someone a good name for a web application which does the following?
- inventory of network devices (routers/switches/firewalls etc.)
- documentation of installation (sites/buildings/rooms/racks/patch
panels)
- connection inventory (circuits/links/vlans/ips)
- iphone optimised web interface for onsite quering data
- based on mysql/php/ajax
So far I came up only with:
- Vaijeri (inherited from living three years in finland ;o)
- PMC (poor man's cramer, but this would wake up some lawyers ;o)
cheers
richard
hi there
i'm just looking if someone knows a _simple_ way / tool:
- should be a POP3 AND IMAP server
- it should accept ANY username / password
- it should present ONE predefined email to the customer (to inform him about something) - if the customer later is trying to get mails he should not get it again (per username base)
- it should be opensource ,-) - and should preferably run on FreeBSD
does someone knows about some application which fits my requirements?
-steven
-------- Message d'origine--------
De: swinog-bounces(a)lists.swinog.ch de la part de Reza Kordi
I got a 2 pair copper and I am looking for a product to offer Ethernet connectivity at speed of 4mbps or higher. Distance is about 1km and the copper is in the same local loop.
--------------------------------------------
Not sure about differences in countries, but here we use Adtran's TA-5000 with the 838 at the CPE:
http://www.adtran.com/web/page/portal/Adtran/group/441
scott
-------------------
-------------------
------------------
look here:
http://www.actelis.com/products/prod-ml620.php
or here:
http://www.flexdsl.ch/SHDSL_Orion2.html
we are using it in our own colocation/unbundling
pops in austria - this is really working fine and
delivers up to carrier class Ethernet
bandwith depends on the copper quality - but
at 1 km there should be more than 10 mbit on
two copper pairs possible.
I can also give you a contact with our dsl specialist
if you need deeper informations.
bernd / i3b.at / as39912
-----Original Message-----
From: swinog-bounces(a)lists.swinog.ch [mailto:swinog-bounces@lists.swinog.ch] On Behalf Of Reza Kordi
Sent: Tuesday, May 19, 2009 8:32 PM
To: swinog(a)swinog.ch
Subject: [swinog] >4MB over copper pairs
Hi Guys,
I got a 2 pair copper and I am looking for a product to offer Ethernet connectivity at speed of 4mbps or higher. Distance is about 1km and the copper is in the same local loop.
Any Ideas?
Cheers,
Reza
_______________________________________________
swinog mailing list
swinog(a)lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
yeah, true. the IMAP client might think all remote messages are gone, and then
flush the local cache... not nice :)
then we just need the protocol handling part from Courier, and report an error
message to the user immediately after connect.
But anyway, Steven, why do you want to block pop/imap on a hotspot?
----- Original Message ----
> From: Marc SCHAEFER <schaefer(a)alphanet.ch>
> To: Stanislav Sinyagin <ssinyagin(a)yahoo.com>
> Sent: Saturday, May 16, 2009 6:26:58 PM
> Subject: Re: [swinog] special mail solution?
>
> On Fri, May 15, 2009 at 11:56:50AM -0700, Stanislav Sinyagin wrote:
> > then the daemon will report an error when trying to delete the message.
> > As it's a hotspot device, we don't want its syslog overflown with such
> things:)
>
> The whole idea seems wrong, because you will be messing with the user
> agent message counter/message ID.
>
> Aka the user agent will think the new state of the mailbox is the one
> you present, which might have mild implications with POP, but big ones
> with IMAP.
>
> Just have an error message.
Hallo,
Machte in meinen Ferien wieder mal eine kleine Statistik der Spams von
unserem Testserver (100 E-Mailadressen)
Aufspaltung nach woher die Spams kommen hab ich noch nicht gemacht... Dazu
fehlt mir die Lust...
Ist ein wenig zur Info und entnerven...
E-Mails Jahr 2003 184690
E-Mails Jahr 2004 706275
E-Mails Jahr 2008 32857500
E-Mail Jahr 2009* 39203190
Spams Jahr 2003 37595
Spams Jahr 2004 480340
Spams Jahr 2008 24643125
Spams Jahr 2009* 32010183
In Prozente
im Jahr 2003 20.35 %
im Jahr 2004 68 %
im Jahr 2008 75 %
im Jahr 2009* 81.65 %
* Hochgerechnet auf das Jahr 2009 wenn es sich gleich enwickelt wie bis Ende
April
Gruss Xaver
Does some have any guidance as to how much S/N margin Swisscom requires
for their BBCS VDSL loops. I have a case where the S/N margin in 22dB on
the downstream and it surprises me the line doesn't train at a higher
rate (current rate is 13264kbps).
I understand that during the initial setup phase the modem is probed
more or less every 24 hours but doesn't seem to update if the line
characteristics evolve over time.
If someone can shed some light or provide me with a contact within
Swisscom that actually knows the story behind this I would appreciate it.
Thanks
Thomas
Hi,
We have an extra Quantum DXi5500 NAS that we would like to sell.
It has all the latest upgrades of the chassis and firmware. It has no
warranty or maintenance contract.
Here is a link to one for sale on Amazon (!)
http://www.amazon.com/dp/B000NSFN2Y/ref=asc_df_B000NSFN2Y776726?smid=A3S
KJE188CW5XG&tag=mysimon-ce00-mp-20&linkCode=asn
and here is the manufacturer's website:
http://www.quantum.com/Products/Disk-BasedBackup/DXi5500/Index.aspx
This is really a fantastic device, we just don't need two here.
If you are interested and would like to see it, just let me know.
Best regards,
Mickey
--
Mickey Coggins
Tel: +41-22-783-6630, GSM: +41-79-476-8183
