swinog

swinog@lists.swinog.ch

2 participants
2918 discussions

trillian & IRC
by robert＠bertschinger.net 15 Oct '07

15 Oct '07

Hi, Anybody using trillian for irc? I've been having problems recently and therefore I haven't been in the swinog channel for a while ... Any hints and tips are therefore very welcome ;-) Cheers Robert

3 2

SwissIX goes 10Gig!
by Fredy Kuenzler 14 Oct '07

14 Oct '07

SwissIX goes 10Gig! Dear all, The generous offering of SWITCH (AS559) to participate in the cost of a new shiny 10Gig capable platform enables us to go ahead with upgrading the peering infrastructure of SwissIX http://www.swissix.ch/ while maintaining the idea of a community-driven, non-profit and free internet exchange. FastE and GigE ports will remain with a free setup (except at two locations a small fee for cabling expenses is charged). However the SwissIX board decided to charge a bigger setup fee for 10Gig ports: CHF 12000.00 one time fee incl. SR Xenpak or CHF 13500.00 one time fee incl. LR Xenpak (Prices are valid until further notice, and note that cabling cost of the colocation is not included in the price mentioned.) This fee is payable to SwissIX (currently w/o VAT) and will help to grow the hardware platform. Please note that SwissIX is charging only a one-time fee for 10Gig, there are *NO RECURRING COSTS* for all ports. (Association membership is optional but encouraged - see http://www.swissix.ch/memberappl.php) If you are interested in a 10Gig port, please contact me offlist. We hope to get the 10Gig platform up and running in Q4 2007 in the first location (Equinix Zurich 1, formerly known as IXEurope Zurich 1, formerly known as Telehouse Facilities, Hardstrasse 235, CH-8050 Zurich). For the 2nd location InterXion Glattbrugg is forseen, but to achieve this, more funding is needed. If you would like to join SwissIX please follow the setup procedure: http://www.swissix.ch/how_to_get_connected.php Of course we are always looking for more sponsors and members - if you would like to support the SwissIX project, please contact me offlist. Best regards, Fredy Künzler SwissIX President http://www.swissix.ch/

6 7

RE: [swinog] flapping E3 card
by Sudan, Marco 13 Oct '07

13 Oct '07

Sorry... channelized E3 with 16 E1's marco -----Original Message----- From: swinog-bounces(a)lists.swinog.ch [mailto:swinog-bounces@lists.swinog.ch] On Behalf Of Christian Jouas Sent: Freitag, 12. Oktober 2007 12:53 To: swinog(a)swinog.ch Subject: RE: [swinog] flapping E3 card You mean channelized E3 with Nx2M channels on it or multiple NxE3 with multilink ? Cheers Chris ________________________________ From: swinog-bounces(a)lists.swinog.ch [mailto:swinog-bounces@lists.swinog.ch] On Behalf Of Sudan, Marco Sent: vendredi, 12. octobre 2007 12:42 To: swinog(a)swinog.ch Subject: [swinog] flapping E3 card Hi Swinoggers, I have a problem with a flapping E3 card on a Cisco VXR. I'm just wondering i somebody else had problems with that recently. On the E3 card we have Multilink configured. In the beginning we tought it is a clocking problem. But even now the card starts to flap again and only a hardware reset of the interface brings it back to life. The interface got replaced as well...and now i'm running out of options. For any hint i would be pleased. Cheers marco ************************************************************************ ************* The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing security(a)colt.net and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ************************************************************************************* The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing security(a)colt.net and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.

3 2

flapping E3 card
by Sudan, Marco 12 Oct '07

12 Oct '07

Hi Swinoggers, I have a problem with a flapping E3 card on a Cisco VXR. I'm just wondering i somebody else had problems with that recently. On the E3 card we have Multilink configured. In the beginning we tought it is a clocking problem. But even now the card starts to flap again and only a hardware reset of the interface brings it back to life. The interface got replaced as well...and now i'm running out of options. For any hint i would be pleased. Cheers marco ************************************************************************************* The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing security(a)colt.net and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.

2 1

Zyxel IP DSLAM
by Theurl Michael 11 Oct '07

11 Oct '07

Hello Swinog, Is someone out there with some zyxel IP Dslam knowhow ? In special combination vlan configuration on a Zyxel IES2000 with a MSC1000 with cisco dot1q trunk setup ? kind regards Michael

2 1

Some well known faces...
by Viktor Steinmann 11 Oct '07

11 Oct '07

I hope this link works: http://www.sf.tv/var/videoplayer.php?catid=schweizaktuell&docid=20071010&nr… Otherwise to to http://www.sf.tv -> SF Videos -> Schweiz Aktuell 10.10.2007 -> Hemden nach Mass Cheers, Viktor P.S.: Those who don't know InterXion - no need to watch the video...

1 1

Some well known faces ;-)
by Viktor Steinmann 11 Oct '07

11 Oct '07

I hope this link works: http://www.sf.tv/var/videoplayer.php?catid=schweizaktuell&docid=20071010&nr… Otherwise go to http://www.sf.tv -> SF Videos -> Schweiz Aktuell 10.10.2007 -> Hemden nach Mass ;-) I have the strange feeling, that Roger didn't receive his shirt by the Swiss Post... ;-) Cheers, Viktor

1 0

VTX to buy Deckpoint
by Alexandre Suter 10 Oct '07

10 Oct '07

http://www.deckpoint.ch/fr/societe/news/news-details/article/deckpoint-lie-… (French ; no English version that I'm aware of, but the subject pretty much says it all) Regards, Alexandre

2 1

Offtopic: Berufsmeisterschaften - Hardwareausleihe gesucht
by Silvan Gebhardt 09 Oct '07

09 Oct '07

Hallo Mailingliste sorry für Anmelden - und - schon - betteln, ich habe eine sehr eilende Anfrage. Am 26. Oktober ist Schweizer Berufsmeisterschaften in der IT (Netzwerktechnik) Ich habe gestern erfahren, das man Kentnisse in CISCO Equipment braucht. Ich suche hiermit jemanden, der mit etwas ausleihen könnte für zwei Wochen - Auch gegen Gegenleistung natürlich Besten dank! Hello Mailinglist sorry for Asking in this range as first post....: The October 26th is Swiss IT Professional Apprentice Championship. Therefore, I should have Knowhow with Cisco Equipment, as I heard Yesterday. (Yikes!) I seek somebody, which could lend/rent me some Cisco Equiment (PIX, Catalyst, Concentrator needed) for two weeks. Thank you Grüesse Silvan

2 1

Candid Aeby is out of the office.
by Candid Aeby 03 Oct '07

03 Oct '07

I will be out of the office starting 03.10.2007 and will not return until 05.10.2007. I will respond to your message when I return.

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

swinog