swinog

swinog@lists.swinog.ch

2 participants
2918 discussions

Re: [swinog] VDSL/Zyxel P2802 HWL not "strong" enough for a smallcompany LAN?
by Xaver Aerni 06 Mar '08

06 Mar '08

What kind of Setup did you have on the Dislam... Please check if the link is going down... If yes. Swisscom should reduce the Traffic rate on the line. Standard is the max. by 25000. Some line must be fixed on 20000 or less... Greetings Xaver ----- Original Message ----- From: "Kurt A. Schumacher" <Kurt.Schumacher(a)schumi.ch> To: <swinog(a)swinog.ch> Sent: Wednesday, March 05, 2008 2:47 PM Subject: RE: [swinog] VDSL/Zyxel P2802 HWL not "strong" enough for a smallcompany LAN? > Salut Olivier, > > We are using ZyXEL ZyWALL1050/USG1000/USG300 behind various P-2802. > > In most case, we have some green.ch public IP address subnet, the P-2802 > is running as (br-)router, smaller installations PPPoE is > terminated on the ZyWALL. > > As wholesales VDSL2 is PPPoE only, there is no advantage in terminating > the tunnel direct on the router as in the ADSL times using > PPPoA then. > > Please contact me off-list for some more in-depth P-2802 information. > > Regards, > > -Kurt. > > -----Original Message----- > From: swinog-bounces(a)lists.swinog.ch > [mailto:swinog-bounces@lists.swinog.ch] On Behalf Of Olivier Mueller > Sent: Wednesday, March 05, 2008 2:32 PM > To: swinog(a)swinog.ch > Subject: [swinog] VDSL/Zyxel P2802 HWL not "strong" enough for a small > company LAN? > <snip> > > _______________________________________________ > swinog mailing list > swinog(a)lists.swinog.ch > http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog >

3 3

Re: [swinog] VDSL/Zyxel P2802 HWL not 'strong' enough for a small company LAN?
by Stanislav Sinyagin 06 Mar '08

06 Mar '08

----- Original Message ---- > From: Manuel Krummenacher <mkr(a)mkr-tech.ch> > You're right, I didn't think of that point. As a linux guy, I know what > things like "dd" and "/dev/sdb" mean, but a windows admin would have to > spend some time to get the point. If I would have to configure a PIX, I > had to read through the documentation for at least 4 hours. ;-) > > > just my two cents, I'm vendor-agnostic, and open source supporter :-) > > I'm pleased to hear that! ;-) If you need (or want) to install pfSense, I > would be happy to help you. I'm afraid I would do that myself quite easily (http://sinyagin.pp.ru/resume.html) ;-) But again, what works for few geeks may not be a proper business solution :-)

1 0

Re: [swinog] VDSL/Zyxel P2802 HWL not 'strong' enough for a small company LAN?
by Stanislav Sinyagin 06 Mar '08

06 Mar '08

----- Original Message ---- > From: Manuel Krummenacher <mkr(a)mkr-tech.ch> > I get your point. You have to do some work to get it running, but its far > away from days. If you don't need serial access, you can skip the part > with the baud-rate configuration. The interfaces can be assigned from the > web interface. (And you don't have to unmount the CF card as stated in the > article, because dd doesn't need it mounted.) I get an ALIX up and running > in about an hour incl. (simple) configuration. + 3-4 hours to read all the pieces of documentation, choosing the right board that you want to use, all the software options that are available, adding the wireless cards of proper vendor, chatting on this list etc. + 1 hour, as you say, to assemble it all together and boot for the first time + 1-2 hours to get through all the configuration options and getting to know the product + 1 hour to build a proper backup solution At the end of the day, you get your firewall which will most probably need few hours more for fine-tuning etc. For my own office, I would consider this as an option. If I'd intend to install it to a customer, it needs at least few dozens of installations before it pays back all the invested time. For a small number of installations, a small Cisco PIX firewall might be much easier to get. just my two cents, I'm vendor-agnostic, and open source supporter :-)

2 1

Re: [swinog] VDSL/Zyxel P2802 HWL not 'strong' enough for a small company LAN?
by Stanislav Sinyagin 05 Mar '08

05 Mar '08

according to what this guy writes, http://rockpenguin.wordpress.com/2008/02/23/installing-pfsense-on-the-alix2… such thing as a firewall based on Alix platform requires at least few days of work for a guy on a salary with nothing else to do :) If you start counting the cost of worktime to have it up and running, probably any off-the-shelf firewall would be much more affordable. Or even a Cisco 8XX router, whatever current SoHo series they have :) ----- Original Message ---- From: Rainer Duffner <rainer(a)ultra-secure.de> To: swinog(a)swinog.ch Sent: Wednesday, March 5, 2008 3:39:54 PM Subject: Re: [swinog] VDSL/Zyxel P2802 HWL not 'strong' enough for a small company LAN? Manuel Krummenacher schrieb: > I personally would buy an Alix board from pcengines.ch (costs about CHF > 150 with 3 LAN interfaces), install pfSense on it, switch the Zyxel to > bridge mode and be happy. ;-) With the Alix, you would also gain extra > benefits like complex packet filter rules, traffic shaping, traffic graphs > etc. (see pfsense.com for full feature list). > Seconded. I've got a previous-generation WRAP board with pfSense (just upgraded to the recently released 1.2). It should be noted that pfSense also does IPSEC and OpenVPN "SSL-VPN" and a host of other things. I'm not sure how much bandwidth the Alix-boards can shuffle, but my WRAP is supposed to max out somewhere in the 30MBit range. You can also install it on an old PC and temporary replace the Zyxel, to get some idea about the current traffic pattern. Rainer _______________________________________________ swinog mailing list swinog(a)lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

2 1

Job openings @ Init Seven AG
by kleindienst＠init7.net 04 Mar '08

04 Mar '08

Dear Swinog-member After confer with Fredy Kuenzler, I'd like to introduce our job openings at Init Seven AG. We're looking for two technical oriented personalities for our technical stuff. One role is a replacement for our "team leader techniques". [1] Marco decide to leave Init Seven AG by end of May 2008. The other role is a new member in our technical crew, mainly in systems administration (Linux) and configurations. [2] You may check our job descriptions (German only, so far) on our website. Please ask any questions to my attention. Thank you much for your advertence and cu @ Swinog 16, latest. Regards, Emanuel [1] http://www.init7.net/jobs-teamleader_technik.php [2] http://www.init7.net/jobs-linux-admin.php Freundliche Grüsse Emanuel Kleindienst Init Seven AG Elias Canetti Strasse 7 CH-8050 Zürich phone: +41 44 315 44 00 fax: +41 44 315 44 01 mobile: +41 79 416 66 10 skype: emanuel.kleindienst http://www.init7.net/

1 0

Hardware: Anyone needs a Catalyst 4000 24-Port 100Base-FX?
by Peter Schwindt 04 Mar '08

04 Mar '08

Hello, cleaning things up I found upper mentioned line card (part number WS-X4124-FX-MT). Anyone in need of it? If so, please contact me off-list. Thanks, Peter -- Peter Schwindt --------------------- mailto:schwindt@ba-loerrach.de -- Rechenzentrum Tel: +49 7621/2071-202 Berufsakademie Loerrach Fax: +49 7621/2071-209 -- Hangstr. 46-50, 79539 Loerrach ---------- http://www.ba-loerrach.de/ --

1 0

Job openings @ Init Seven AG
by kleindienst 04 Mar '08

04 Mar '08

Dear Swinog-member After confer with Fredy Kuenzler, I'd like to introduce our job openings at Init Seven AG. We're looking for two technical oriented guys for our technical stuff. One role is a replacement for our "team leader techniques". [1] Marco decide to leave Init Seven AG by end of May 2008. The other role is a new member in our technical crew, mainly in systems administration (Linux) and configurations. [2] You may check out job descriptions (German only, so far) on our website. Please ask any questions to my attention. Thank you much for your advertence and cu @ Swinog 16, latest. Regards, Emanuel [1] http://www.init7.net/jobs-teamleader_technik.php [2] http://www.init7.net/jobs-linux-admin.php Freundliche Grüsse Emanuel Kleindienst Init Seven AG Elias Canetti Strasse 7 CH-8050 Zürich phone: +41 44 315 44 00 fax: +41 44 315 44 01 mobile: +41 79 416 66 10 skype: emanuel.kleindienst http://www.init7.net/ -- Init Seven AG, OpenWebmail

1 0

Job openings @ Init Seven AG
by Emanuel Kleindienst / Init7 03 Mar '08

03 Mar '08

Dear Swinog-member After confer with Fredy Kuenzler, I'd like to introduce our job openings at Init Seven AG. We're looking for two technical oriented personalities for our technical stuff. One role is a replacement for our "team leader techniques". Marco decide to leave Init Seven AG by end of May 2008. The other role is a new member in our technical crew, mainly in systems administration (Linux) and configurations. You may check out job descriptions (German only, so far) on our website, [1] and [2]. Please ask any questions to my attention. Thank you much for your advertence and cu @ Swinog 16, latest. Regards, Emanuel [1] http://www.init7.net/jobs-teamleader_technik.php [2] http://www.init7.net/jobs-linux-admin.php Freundliche Grüsse Emanuel Kleindienst Init Seven AG Elias Canetti Strasse 7 CH-8050 Zürich phone: +41 44 315 44 00 fax: +41 44 315 44 01 mobile: +41 79 416 66 10 skype: emanuel.kleindienst http://www.init7.net/

1 0

problem reaching AS5511
by Philippe Strauss 03 Mar '08

03 Mar '08

-- Philippe Strauss av. de Beaulieu 25 1004 Lausanne http://philou.ch

1 0

problem reaching AS5511
by Philippe Strauss 03 Mar '08

03 Mar '08

Hello swinogers, We (DFi, AS12333) have problems reaching AS5511 (OpenTransit). Anyone else seeing this? regards. -- Philippe Strauss av. de Beaulieu 25 1004 Lausanne http://philou.ch

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

swinog