My router is already celebrating BE 100...

Cheers,

Roger

RP/0/RSP0/CPU0:lab-router#sh int des | i BE Mon Jul 4 14:48:18.665 MEST

Interface Status Protocol Description -------------------------------------------------------------------------------- BE100 up up Lets celebrate BE-100 RP/0/RSP0/CPU0:lab-router#sh int bundle-ether 100 Mon Jul 4 14:48:32.049 MEST Bundle-Ether100 is up, line protocol is up Interface state transitions: 27 Dampening enabled: penalty 0, not suppressed half_life: 1 reuse: 750 suppress: 2000 max-suppress-time: 4 Description: Lets celebrate BE-100 Internet address is 10.8.10.22/30 MTU 4484 bytes, BW 80000000 Kbit (Max: 80000000 Kbit) reliability 255/255, txload 12/255, rxload 0/255 Encapsulation ARPA, loopback not set, ARP type ARPA, ARP timeout 04:00:00 No. of members in this bundle: 8 TenGigE0/3/0/0 Full-duplex 10000Mb/s Active TenGigE0/3/0/1 Full-duplex 10000Mb/s Active TenGigE0/3/0/2 Full-duplex 10000Mb/s Active TenGigE0/3/0/3 Full-duplex 10000Mb/s Active TenGigE0/4/0/0 Full-duplex 10000Mb/s Active TenGigE0/4/0/1 Full-duplex 10000Mb/s Active TenGigE0/4/0/2 Full-duplex 10000Mb/s Active TenGigE0/4/0/3 Full-duplex 10000Mb/s Active Last input 00:00:00, output 00:00:00 Last clearing of "show interface" counters 2d17h 30 second input rate 620000 bits/sec, 1182 packets/sec 30 second output rate 3952721000 bits/sec, 331405 packets/sec 277416541 packets input, 18127272588 bytes, 0 total input drops 0 drops for unrecognized upper-level protocol Received 0 broadcast packets, 158094195 multicast packets 0 runts, 0 giants, 0 throttles, 0 parity 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 1470026577 packets output, 1802143365158 bytes, 0 total output drops Output 0 broadcast packets, 158139242 multicast packets 0 output errors, 0 underruns, 0 applique, 0 resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions

RP/0/RSP0/CPU0:lab-router#

On Mon, 4 Jul 2011, roger@mgz.ch wrote:

nice the 99th

a pain in the a** i cant attend maybe the BE's could be expanded by a video conf, beer is available here as well

Roger

...

hi all

due to some issues I need ti shift the BE99 to monday in one week. I will update registration and send out the invitation tomorrow.

greetings

-steven

Jeroen,

Of course BE100 is IPv6 capable! It is a core interface and transports labeled packets...

You still need IPv4 for LDP:-)^H(

Cheers,

Roger

On Mon, 4 Jul 2011, Jeroen Massar wrote:

On 2011-07-04 15:19 , Roger Gottsponer wrote:

...

My router is already celebrating BE 100...

...

Description: Lets celebrate BE-100 Internet address is 10.8.10.22/30

No IPv6? :)

Greets, Jeroen