22 Nov
2012
22 Nov
'12
12:06 p.m.
We use the fully sfp model. The giga ports are taken with sfp cables for uplink. We run
100bas bx on the fa ports. But I have some special cases and I don't want regular cpe
here.
Frederic Gargula <frederic.gargula(a)ip-max.net> schrieb:
Hello,
ME 3400G-2CS has only 2 10/100/1000 ports.
Best regards,
Frederic Gargula
IP-Max
On Nov 22, 2012, at 11:58 AM, vwatson(a)dancendrumarts.com wrote:
--
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.
Hi Silvan:
Hope you are doing well. It looks like there is only one model of
these switches
that supports SFP on the 100mbit ports. That model is ME
3400-24FS. It supports SFP on the 100mbit ports and on the 2 gbit
uplink ports.
The other switch from this platform that has only 10/100mbit ports
(ME 3400-24TS)
only supports SFP on the 2 gigabit uplink ports.
The remainder of the switches in this series:
ME 3400G-12CS
ME 3400G-2CS
Both have 24 10/100/1000 Dual purpose ports that support SFP and
RJ45. I hope this
helps. Best Regards,
Vinniw Watson
-----Original Message-----
From: Silvan Gebhardt [mailto:gebhardt@openfactory.ch]
Sent: Thursday, November 22, 2012 10:54 AM
To: swinog(a)swinog.ch
Subject: [swinog] Yet another "need hardware now" - 100mbit SFP
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Folks, I have an
ME3400. I need
SFP that work on the 100mbit ports, I need 1x LX 2x SX
OR: 3x 100mbit Copper please note, the fastethernet ports on this
switch do not accept the 100BASE-SX or LX from cisco at all. anyone
that can help me out with SFP that work in that cisco switch please
contact me offlist with a good offer. Best Silvan -----BEGIN PGP
SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG
with undefined - http://www.enigmail.net/
iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo
x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -----END PGP SIGNATURE-----
> _______________________________________________
> swinog mailing list
> swinog(a)lists.swinog.ch
> http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog 
22 Nov
22 Nov
12:33 p.m.
New subject: Yet another "need hardware now" - 100mbit SFP
Hi Silvan,
mmmh, I assume you have ME-3400-24FS-A and according to
http://www.cisco.com/en/US/prod/collateral/switches/ps6568/ps6580/product_d…
all 24 SFP ports should support 100BASE-FX, LX, BX, etc. even the two SFP Gigabit ports do
support 100BASE-X operations.
Can you explain in more detail what issue you are facing so we can better help?
regards Thomas
Von: swinog-bounces(a)lists.swinog.ch [mailto:swinog-bounces@lists.swinog.ch] Im Auftrag von
Silvan M. Gebhardt
Gesendet: Donnerstag, 22. November 2012 12:06
An: Frederic Gargula; vwatson(a)dancendrumarts.com
Cc: swinog(a)swinog.ch
Betreff: Re: [swinog] Yet another "need hardware now" - 100mbit SFP
We use the fully sfp model. The giga ports are taken with sfp cables for uplink. We run
100bas bx on the fa ports. But I have some special cases and I don't want regular cpe
here.
Frederic Gargula
<frederic.gargula@ip-max.net<mailto:frederic.gargula@ip-max.net>> schrieb:
Hello,
ME 3400G-2CS has only 2 10/100/1000 ports.
Best regards,
Frederic Gargula
IP-Max
On Nov 22, 2012, at 11:58 AM,
vwatson@dancendrumarts.com<mailto:vwatson@dancendrumarts.com> wrote:
Hi Silvan:
Hope you are doing well. It looks like there is only one model of these switches that
supports SFP on the 100mbit ports. That model is ME 3400-24FS. It supports SFP on the
100mbit ports and on the 2 gbit uplink ports.
The other switch from this platform that has only 10/100mbit ports (ME 3400-24TS) only
supports SFP on the 2 gigabit uplink ports.
The remainder of the switches in this series:
ME 3400G-12CS
ME 3400G-2CS
Both have 24 10/100/1000 Dual purpose ports that support SFP
and
RJ45. I hope this helps. Best Regards,
Vinniw Watson
-----Original Message-----
From: Silvan Gebhardt [mailto:gebhardt@openfactory.ch]
Sent: Thursday, November 22, 2012 10:54 AM
To: swinog@swinog.ch<mailto:swinog@swinog.ch>
Subject: [swinog] Yet another "need hardware now" - 100mbit SFP
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Folks, I have an ME3400. I need SFP that
work on the 100mbit ports, I need 1x LX 2x SX OR: 3x 100mbit Copper please note, the
fastethernet ports on this switch do not accept the 100BASE-SX or LX from cisco at all.
anyone that can help me out with SFP that work in that cisco switch please contact me
offlist with a good offer. Best Silvan -----BEGIN PGP SIGNATURE----- Version: GnuPG
v1.4.11 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/
iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo
x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -----END P
GP
SIGNATURE-----
________________________________
swinog mailing list
swinog@lists.swinog.ch<mailto:swinog@lists.swinog.ch>
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
--
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.
4035
days inactive
4035
days old
1 comments
2 participants
participants (2)
-
Silvan M. Gebhardt -
Thomas Weible - FLEXOPTIX