Hi André

We've used this several times for customer connections at TIX. You need on one side a DTE and on the other side a DCE cable. As soon as the DCE cable is connected, can you set the clock rate on this I/F. --> X.21 up to 8Mbit/s

Cheers, Günti

-----Original Message----- From: swinog-bounces@lists.swinog.ch [mailto:swinog-bounces@lists.swinog.ch]On Behalf Of Andre Oppermann Sent: Donnerstag, 1. September 2005 19:47 To: swinog@swinog.ch Subject: [swinog] X.21, V.35 Cisco Interface in Master Mode

Is anyone of you running a Cisco with X.21 or V.35 interface in master mode (the Cisco is supplying the clocking on the line). Normally the modem (DCE) supplies the line clock to the Cisco.

I'm interested in (production) cases where you had to supply the clock from the cisco to the other side.

-- Andre _______________________________________________ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog