What kind of Setup did you have on the Dislam... Please check if the link is going down... If yes. Swisscom should reduce the Traffic rate on the line. Standard is the max. by 25000. Some line must be fixed on 20000 or less... Greetings Xaver ----- Original Message ----- From: "Kurt A. Schumacher" Kurt.Schumacher@schumi.ch To: swinog@swinog.ch Sent: Wednesday, March 05, 2008 2:47 PM Subject: RE: [swinog] VDSL/Zyxel P2802 HWL not "strong" enough for a smallcompany LAN?
Salut Olivier,
We are using ZyXEL ZyWALL1050/USG1000/USG300 behind various P-2802.
In most case, we have some green.ch public IP address subnet, the P-2802 is running as (br-)router, smaller installations PPPoE is terminated on the ZyWALL.
As wholesales VDSL2 is PPPoE only, there is no advantage in terminating the tunnel direct on the router as in the ADSL times using PPPoA then.
Please contact me off-list for some more in-depth P-2802 information.
Regards,
-Kurt.
-----Original Message----- From: swinog-bounces@lists.swinog.ch [mailto:swinog-bounces@lists.swinog.ch] On Behalf Of Olivier Mueller Sent: Wednesday, March 05, 2008 2:32 PM To: swinog@swinog.ch Subject: [swinog] VDSL/Zyxel P2802 HWL not "strong" enough for a small company LAN?
<snip>
swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
On Wed, 2008-03-05 at 14:56 +0100, Xaver Aerni wrote:
What kind of Setup did you have on the Dislam... Please check if the link is going down... If yes. Swisscom should reduce the Traffic rate on the line. Standard is the max. by 25000. Some line must be fixed on 20000 or less...
The status of port is showtime Link type: VDSL2 Bearer1 downstream rate: 27536 kbps Bearer1 upstream rate: 11040 kbps
So before getting an Alix board, you suggest I should first ask Swisscom (via Green) to reduce the rate?
Regards & thanks for your feedback! Olivier
I think this is a good Idea... Swisscom could also look on the Dslam Log if you have to many errors on the Line... Many of the problems could be elemated by lower rates. Greetings Xaver ----- Original Message ----- From: "Olivier Mueller" om-lists-swinog@omx.ch To: swinog@swinog.ch Sent: Wednesday, March 05, 2008 4:03 PM Subject: Re: [swinog] VDSL/Zyxel P2802 HWL not "strong" enough for asmallcompany LAN?
On Wed, 2008-03-05 at 14:56 +0100, Xaver Aerni wrote:
What kind of Setup did you have on the Dislam... Please check if the link is going down... If yes. Swisscom should reduce the Traffic rate on the line. Standard is the max. by 25000. Some line must be fixed on 20000 or less...
The status of port is showtime Link type: VDSL2 Bearer1 downstream rate: 27536 kbps Bearer1 upstream rate: 11040 kbps
So before getting an Alix board, you suggest I should first ask Swisscom (via Green) to reduce the rate?
Regards & thanks for your feedback! Olivier
swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Hi Oliver On Wed, Mar 5, 2008 at 4:03 PM, Olivier Mueller om-lists-swinog@omx.ch wrote:
The status of port is showtime Link type: VDSL2 Bearer1 downstream rate: 27536 kbps Bearer1 upstream rate: 11040 kbps
So before getting an Alix board, you suggest I should first ask Swisscom (via Green) to reduce the rate?
You should have a look at the two following values too:
- Downstream attainable payload rate: - Downstream attainable line rate:
They show the maximum possible transfer rate at the time of the DSL sync. Since a fluctuation of a few MBit/s can be normal for various reasons, your effective downstream rate should be noticeably lower than those maximum values. If the margin is too small, this might indicate that you could get a more stable sync using a lower fixed rate (like 20 mbit/s).
My two lines had to be fixed at 8 MBit/s each to get a stable sync, but they are rock solid (although my usage involves more traffic than multiple connections).
However if a sync issue is the reason for your disconnects, they will show up in your routers logs. If the line stays synced when the timeouts start to appear, the problem might be with your provider or as you suspected, with the P2802.
regards
Flavio