Hello!
Am 03.03.05 schrieb Erich Hohermuth:
interface BRI0 no ip address encapsulation ppp no ip route-cache no ip mroute-cache load-interval 30 dialer pool-member 6 isdn switch-type basic-net3 isdn tei-negotiation first-call no cdp enable ppp multilink
My options:
interface BRI0 description ISDN interface no ip address encapsulation ppp dialer pool-member 2 isdn switch-type basic-net3 isdn answer1 0556145044 isdn calling-number 0556145044 no cdp enable
I added "isdn tei-negotiation first-call", channel bundling is no desired option:
rt-1#conf t rt-1(config)#int bri0 rt-1(config-if)#isdn tei-negotiation first-call rt-1(config-if)#no ip route-cache rt-1(config-if)#no ip mroute-cache rt-1(config-if)#end Mar 3 15:11:39.332: %SYS-5-CONFIG_I: Configured from console by console
rt-1#clear interface bri 0 Mar 3 15:12:05.896: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 75 changed to up
(now Layer 2 is up):
rt-1#show isdn status Mar 3 15:14:19.404: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 77 changep Global ISDN Switchtype = basic-net3 ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-net3 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 77, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x80000003 Total Allocated ISDN CCBs = 0
(15 seconds later):
Mar 3 15:12:20.864: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 75 changed to down
(and Layer 2 is down):
rt-1#show isdn status Global ISDN Switchtype = basic-net3 ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-net3 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 75, Ces = 1, SAPI = 0, State = TEI_ASSIGNED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x80000003 Total Allocated ISDN CCBs = 0
Dialing is only possible while Layer 2 Status is MULTIPLE_FRAME_ESTABLISHED...
Beat