---------- Forwarded message ---------- From: Hank Nussbacher hank@efes.iucc.ac.il Date: 24.04.2007 01:00 Subject: [c-nsp] Cisco recall on 3560 and 3750 switches and PWR-2300RPS To: cisco-nsp@puck.nether.net Cc: cisco-l@listserv.ac.il

"Although there has not been a reported safety incident, Cisco is aware of a potential safety issue that can be caused by a welded nut breaking free inside the switch and Redundant Power Supply (RPS).

Tightening the mounting screws used to secure the power supply or blower module to the switch or the RPS can lead to a welded nut on the interior to the switch or RPS breaking free from the chassis sheet metal. A risk of electric shock may exist if the chassis is not properly grounded and the loose nut comes in contact with the power supply line-in and chassis."

There is no workaround. To check whether your switch needs to be replaced and to submit your details for the RMA go to the following page:

http://www.cisco.com/en/US/customer/products/ps7077/products_field_notice091... [available to registered users]

This alert is not only for 3560 and 3750 switches but also for owners of RPS - PWR-2300RPS. This RPS can affect the following equipment:

• Cisco Catalyst 3750-E Series Switches • Cisco Catalyst 3750 Series Switches • Cisco Catalyst 3560-E Series Switches • Cisco Catalyst 3560 Series Switches • Cisco Catalyst 3550 Series Switches • Cisco Catalyst 2960 Series Switches • Cisco Catalyst 2950 Series Switches • Cisco Catalyst Express 500 Series Switches (select PoE models only) • Cisco 3825 Integrated Services Routers • Cisco 2851 Integrated Services Routers • Cisco 2821 Integrated Services Routers • Cisco 2811 Integrated Services Routers

Regards, Hank Nussbacher http://www.interall.co.il

_______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/