Frederic:
You are quite right, I stand corrected! The 3400g-2cs has only two 10/100/1000 ports and the 3400g-12cs has 12 such ports. My main point was that these switches support SFP on other than uplink ports and the me 3400-24ts does not. Thanks for the correction. Best Regards,
Vinnie
-----Original Message----- From: Frederic Gargula [mailto:frederic.gargula@ip-max.net] Sent: Thursday, November 22, 2012 12:03 PM To: vwatson@dancendrumarts.com Cc: 'Silvan Gebhardt', swinog@swinog.ch Subject: Re: [swinog] Yet another "need hardware now" - 100mbit SFP
Hello,ME 3400G-2CS has only 2 10/100/1000 ports.Best regards,Frederic GargulaIP-MaxOn Nov 22, 2012, at 11:58 AM, vwatson@dancendrumarts.com wrote:> Hi Silvan:> > Hope you are doing well. It looks like there is only one model of these switches that supports SFP on the 100mbit ports. That model is ME 3400-24FS. It supports SFP on the 100mbit ports and on the 2 gbit uplink ports. > > The other switch from this platform that has only 10/100mbit ports (ME 3400-24TS) only supports SFP on the 2 gigabit uplink ports.> > The remainder of the switches in this series:> > ME 3400G-12CS> ME 3400G-2CS> > Both have 24 10/100/1000 Dual purpose ports that support SFP and RJ45. I hope this helps. Best Regards,> > Vinniw Watson> > > -----Original Message-----> From: Silvan Gebhardt [mailto:gebhardt@openfactory.ch]> Sent: Thursday, November 22, 2012 10:54 AM> To: swinog@swinog.ch> Subject: [swinog] Yet another "need hardware now" - 100mbit SFP> > -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Folks, I have an ME3400. I need SFP that work on the 100mbit ports, I need 1x LX 2x SX OR: 3x 100mbit Copper please note, the fastethernet ports on this switch do not accept the 100BASE-SX or LX from cisco at all. anyone that can help me out with SFP that work in that cisco switch please contact me offlist with a good offer. Best Silvan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -----END PGP SIGNATURE----- > _______________________________________________> swinog mailing list> swinog@lists.swinog.ch> http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
so basically what I have is the all SFP Switch, with 24 Fibre Ports on FastEthernet and 2 Gigabit Ports. Gigabit is all taken since we have 5 switches in a ring.
Therefore I have some situation where my CPE is not appropriate and I wanted to use SX or LX fibre there. 1000BASE TX do not work.
Best Silvan
Am 22.11.2012 13:08, schrieb vwatson@dancendrumarts.com:
Frederic:
You are quite right, I stand corrected! The 3400g-2cs has only two 10/100/1000 ports and the 3400g-12cs has 12 such ports. My main point was that these switches support SFP on other than uplink ports and the me 3400-24ts does not. Thanks for the correction. Best Regards,
Vinnie
-----Original Message----- *From:* Frederic Gargula [mailto:frederic.gargula@ip-max.net] *Sent:* Thursday, November 22, 2012 12:03 PM *To:* vwatson@dancendrumarts.com *Cc:* 'Silvan Gebhardt', swinog@swinog.ch *Subject:* Re: [swinog] Yet another "need hardware now" - 100mbit SFP
Hello, ME 3400G-2CS has only 2 10/100/1000 ports. Best regards, Frederic Gargula IP-Max On Nov 22, 2012, at 11:58 AM, vwatson@dancendrumarts.com wrote: > Hi Silvan: > > Hope you are doing well. It looks like there is only one model of these switches that supports SFP on the 100mbit ports. That model is ME 3400-24FS. It supports SFP on the 100mbit ports and on the 2 gbit uplink ports. > > The other switch from this platform that has only 10/100mbit ports (ME 3400-24TS) only supports SFP on the 2 gigabit uplink ports. > > The remainder of the switches in this series:
ME 3400G-12CS > ME 3400G-2CS > > Both have 24 10/100/1000 Dual
purpose ports that support SFP and RJ45. I hope this helps. Best Regards, > > Vinniw Watson > > > -----Original Message----- > From: Silvan Gebhardt [mailto:gebhardt@openfactory.ch] > Sent: Thursday, November 22, 2012 10:54 AM > To: swinog@swinog.ch > Subject: [swinog] Yet another "need hardware now" - 100mbit SFP > > -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Folks, I have an ME3400. I need SFP that work on the 100mbit ports, I need 1x LX 2x SX OR: 3x 100mbit Copper please note, the fastethernet ports on this switch do not accept the 100BASE-SX or LX from cisco at all. anyone that can help me out with SFP that work in that cisco switch please contact me offlist with a good offer. Best Silvan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -----END PGP SIGNATURE-----
_______________________________________________ > swinog mailing
list > swinog@lists.swinog.ch > http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
-
Silvan Gebhardt -
vwatson＠dancendrumarts.com