Hi
It probably will help very much if you say :
what router,
what IOS version
what BRI interface config you use...
Christian
-----Original Message-----
From: swinog-bounces@lists.swinog.ch
[mailto:swinog-bounces@lists.swinog.ch]On Behalf Of Beat Rubischon
Sent: Donnerstag, 3. März 2005 14:22
To: SWINOG Mailing List
Subject: [swinog] ISDN Layer 2 Problem
Hello!
I'm trying to configure a ISDN backup link on a Cisco. Each time
I reset the BRI it takes about 15 seconds until the session will
be terminated from the Swisscom's side. Call out is only possible
(but working) during this 15 second time frame.
Layer 1 is activated permanently since several years and working
OK.
Following [1], I debugged the link:
[1] http://www.cisco.com/warp/public/129/bri-layer2.html
---8<---
Mar 1 01:26:39: ISDN BR0 Q921: User TX -> IDREQ ri=44602 ai=127
Mar 1 01:26:39: ISDN BR0 Q921: User RX <- IDASSN ri=44602 ai=89
Mar 1 01:26:39: ISDN BR0 Q921: L2_EstablishDataLink: sending SABME
Mar 1 01:26:39: ISDN BR0 Q921: User TX -> SABMEp sapi=0 tei=89
Mar 1 01:26:39: ISDN BR0 Q921: User RX <- UAf sapi=0 tei=89
Mar 1 01:26:39: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 89 changed to up
Mar 1 01:26:49: ISDN BR0 Q921: User RX <- RRp sapi=0 tei=89 nr=0
Mar 1 01:26:49: ISDN BR0 Q921: User TX -> RRf sapi=0 tei=89 nr=0
Mar 1 01:26:54: ISDN BR0 Q921: User RX <- DISCp sapi=0 tei=89
Mar 1 01:26:54: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 89 changed to down
Mar 1 01:26:54: ISDN BR0 Q921: User TX -> UAf sapi=0 tei=89
Mar 1 01:26:54: ISDN BR0 Q921: L2_EstablishDataLink: DISC received & not Passive-shutdown SABME will not be sent.
---8<---
Cisco says "If the DISC message originated from the ISDN switch,
contact the telco." But on the Swisscom-side, nobody is able to
understand my problem or willing to help.
Any hint what I should say to the "Swisskomiker" to get the right
solution? Anyone here who knows a magic keyword in IOS to disable
the need for a permanent Layer 2 connection?
Thanks!
Beat
--
Beat Rubischon \|/ See http://www.rubis.ch/~beat/ for
<beat@rubis.ch> ( 0^0 ) snail- & e-mail, phone, fax & PGP
---------------oOO--(_)--OOo----------------------------------
# wigwam.lugs.ch, Linux 2.4.29-rc2, up 49 days, 0:52, load: 0.24
_______________________________________________
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog