yeah, thank you


I got it running with some massive headache and massive trying and resetting. finally it works. let's see what happens after next router restart.....


you have to set it to brige mode with the Assitant. I always selected the Advanced setup. d'oh



silvan

Am 22.11.2007 um 10:28 schrieb Manuel Wenger:
It does indeed work. After upgrading the firmware to the latest version found on the Studerus web site, you need to perform a full factory reset (pushing the reset button for >10 seconds), then configure the 2802 in bridge mode *without* going through PPP mode first.

Now comes the fun part: connect your PPP client, and wait. After 30-60 minutes the PPP session will be up and running.

It's actually a bug in the firmware. The 2802 sends an ARP request to the Swisscom DSLAM even when in bridge mode. This triggers some kind of ARP filter on the Swisscom side, and you will be unable to log in with your PPP client for some time. For some reason, it only does this the first time. It works immediately after subsequent power-cycles.

-Manuel
_______________________________________________
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog